![[Home]](images/bhome.gif){kind=small}
![[What's New]](images/bnews.gif){kind=small}
![[Products & Services]](images/bprdsrv.gif){kind=small}
![[Feedback]](images/bfeed.gif){kind=small}
Feel the Drill in Cutting Motion for Less Drill or End Mill Breakage and Scrapped Parts...
Smooth, Easy and Quite Operation.
Inch and Metric Versions.
Keyless, Albrecht Chuck Versions 0-1/8" / 0-3mm (optional 0-1/16" / 0-1.5mm); quick and easy drill changes.
WW Collet Versions .0039" - .252" / .1mm - 6.4mm; less drill run out and improved accuracy because tool is supported closer to spindle
Adjustable, Sensitive Quill Lever Feel the drill in cutting motion for less drill breakage and scrapped parts.
Quill Travel 1.5" /38.1mm
Infinitely Variable Spindle Speeds 200-20,000 rpm over two belt ranges (low ratio: 200-4,000 rpm; High ratio: 1,000 - 20,000 rpm)
Spindle Runout .0002" / 0.005mm TIR
Dial Gauge .001" or .05 mm/div; for accurate depth control
Dial Gauge Zero Set Knob
Course Depth Dial .1"/div or 5mm/div version
Adjustable Down Stop .001" or .05mm/div; for blind-hole drilling
Head Column Lock
Fine Grain, Ground Cast Iron Base Except Models 7030/7130, 7040/7140, 7070/7170 which have cast aluminum base; elbow also of fine grain cast iron (Models 7040/7140,7070/7170)
Standard Drill Press Versions
Ideal for laboratory, prototype and precision production work.
ALBRECHT CHUCK VERSIONS
| Inch | Metric | Column Height |
| 7000 | 7100 | 12"/304.8 mm |
| 7010 | 7110 | 19"/482.6 mm |
WW COLLET VERSIONS
| Inch | Metric | Column Height |
| 7050 | 7150 | 12"/304.8 mm |
| 7060 | 7160 | 19"/482.6 mm |
Drill Press with Unique Offset Column
Ideal for drilling PC boards.
Drill to center of a 17"/431.8 mm circle
ALBRECHT CHUCK
| Inch | Metric | |
| 7030 | 7130 |
Drill Presses with Elbow & Deep Throat
Ideal for drilling small holes in larger workpieces.
Greater working area and depth under the quill (up to 14"/355.6 mm).
ALBRECHT CHUCK VERSIONS
| Inch | Metric | |
| 7040 | 7140 |
WW COLLET VERSIONS
| Inch | Metric | |
| 7070 | 7170 |
Drill Press Head Attachments
Mounts 1.25"/31.8 mm diameter column.
Includes depth gage and Stop.
Drill press base attachments also available
ALBRECHT CHUCK VERSIONS
| Inch | Metric | |
| 7400 | 7403 |
WW COLLET VERSIONS
| Inch | Metric | |
| 7401 | 7404 |
Made in USA
for more Information Email to denver@corrick.com
Back to Top | Drill Press Specs & $ | SAM 3 | SAM 5 | SAM 6 |SERVO II Retrofit | Quick'n'Easy CAM | Servo CNC | Home